





Button NiMh Battery 6.0v 80mAh
Specification
Model |
Voltage |
Capacity |
Recommended Trickle Charge Current |
Nominal Charge Current |
Normal Charging Time |
Nominal Discharge Current |
Weight |
60H5A2H |
6.0V |
80mAh |
2.4~4mA |
8mA |
14~16h |
16mA |
18.5g |
Technical Characteristic
Performance
Test Item |
Unit |
Specification |
Conditions |
Capacity |
mAh |
≥80 |
Charge at 0.8mA for 16h Then discharge at 1.6mA to 1.0V |
Open Circuit Voltage(OCV) |
(V) |
≥6.5 |
After 1 hour standard Charge at 0.8mA |
Internal Impedance |
mΩ/cell |
≤1500 |
Upon fully charge |
Max. Discharge Current |
mA |
60 |
|
High rate Discharge (4mA) |
Minute |
≥40 |
Standard charge Before discharge |
Over charge |
|
No leakage No explosion |
Continuous charge at 0.24mA for 1 year |
Charge Retention |
mAh |
≥64 |
Standard charge; Storage: 28days; Standard discharge at 1.6mA |
Cycle Life |
Cycle |
≥400 |
IEC 61951-2 (2003) 7.4.11 |
Leakage |
|
No leakage No explosion |
Continuous charge at 0.8mA for 14 days |
The battery shall not leak during the 14 days which it is submitted to the condition of a temperature of 33±3°C and a relative humidity of 80±5%.
Precaution
1. If you have long time to no use it (such as for one year), you’d better recharge again the battery although our product is full charge on delivery.
2. We recommend you to set the ending voltage at 1.0V/cell. If it is below 1.0V/cell, the battery would be destroyed.
3. Avoid short-circuit and reverse polarity when connecting. Do not fire and disassemble. Because its content is corrosive, it can hurt your skin and eyes.
4. Use and store cells only within the specified working temperature and humidity range.
Brief introduction of our company:
Shenzhen Enbar-tecch enterprises, is mainly engaged in the R&D and manufacturing of non-rechargeable lithium batteries, including: Li-SOCl2 Battery, Li-MnO2 Battery, Thin cell, High temperature Li-SOCl2 Battery, Li-SO2 battery. It is China’s leading manufacturer of non-rechargeable lithium battery.
Our products apply to wide fields, such as intelligent IC card, active RFID, GPS system, communication medical equipment, electricity, transportation, radio&television and industrial equipment and so on.
Cada pago que realices en Cooig.com está protegido con un estricto cifrado SSL y protocolos de protección de datos PCI DSS
Solicita un reembolso si tu pedido no se envía, falta o llega con problemas con el producto